Design

Our TriFlecta boards are lightweight and built to last. We constantly test and modify our design to stand up to the hardest disc throws.

ASSEMBlY

Step 1: Undo strap and open to find assemble pieces

Step 1: Undo strap and open to find assemble pieces

Step 2: Hold the lower portion of the board (large section with the two circular holes) folded and between your knees.

Step 2: Hold the lower portion of the board (large section with the two circular holes) folded and between your knees.

While holding your mouth right, slide the top portion into the lower.

While holding your mouth right, slide the top portion into the lower.

Step 3: Insert the triangle brace’s screw heads into the aluminum channeling.

Step 3: Insert the triangle brace’s screw heads into the aluminum channeling.

Step 4: Grab the two straight poles and slide together. This is your prop pole

Step 4: Grab the two straight poles and slide together. This is your prop pole

Step 5: Slide the prop pole through the triangle brace from the bottom up

Step 5: Slide the prop pole through the triangle brace from the bottom up

Step 6: At top of the prop pole, insert screw head through the hole at the bottom of the hinge strap, followed by the locking tab

Step 6: At top of the prop pole, insert screw head through the hole at the bottom of the hinge strap, followed by the locking tab

Repeat with other board and enjoy TriFlecta!

Repeat with other board and enjoy TriFlecta!

Video Instructions